Pedal Power 2 Plus Screws

[ehowie]

Hi, I have a Pedal Power 2 Plus which I use with a Pedaltrain Jr. Unfortunatley I have misplaced the 4 screws that are used to attatch it to the Pedaltrains brackets

Could someone please tell me what size screws they are as I realise I am going to have to buy some spare ones. I have a bunch of loose screws in my toolbox which I have tried but none of them seemed to fit. I even tried the 2 that are on the front on the Pedal Power but even they seemed a bit to wide.

Thanks in advance!

[JohnClark]

The screws from the sides of the Pedal Power 2+ or the ones that come with the Pedal Train brackets?

The screws that hold the top on the Pedal Power 2+ chassis are #4 x 1/4" Pan Head screws. Write to info@voodoolab.com if you have trouble finding the correct screws locally.

[ehowie]

HI JohnClark,

It's the 4 screws on the side of the Pedal Power that hold the chassis that I lost. I already emailed Voodoo LAbs about a week ago but go no reply.

So those 1/4" Pan Head screws are the ones that hold the chassis in place then? Great, that's all I needed to know.

Thanks for replying

[RH1986]

Hey!

Same problem here - Bought my unit second hand and the screws needed to mount the unit to the Pedaltrain brackets are missing.

Would it be the same screws for Mondo, as above?
The problem is, searching the specified "#4 x 1/4" Pan Head screws” doesn't look like it brings up the right thing for me. It may be because I am in England.

Does anybody know what Screwfix or Wickes would call this, or just be able to share an amazon link?

I’m so excited to get my board sorted and this is such an annoying stumbling block.

Many thanks in advance,

Reuben

[Marlboro05]

#4 screws/bolts are 7/64”, they are usually sold just as screws. They need to be 1/4” long.

Here’s a link on Amazon

https://www.amazon.com.au/Screws-Philli ... B01CEZSXIE

Here’s some black ones

https://www.aimsindustrial.com.au/no.-4 ... 2QQAvD_BwE