Voodoo Lab

Hot rig mate - what pedals do you have in the rack? Nova Repeator?

Thanks James this forum has been incredibly useful to me! Long may it stay

Hey mate great pedalboard! Can you give me some more info on the Carling Footswitch - I need a couple for a project Im working on.

Thanks,
Trueman

If 120mA is only required then the normal outputs 1-4 should be fine. Most current specification are over spec'd i.e. dont actually use that much current. try it out!

Hey Andy what are the current draws from those 3 Boss Pedals?

rationalman56 wrote:I have both a VL PP2 Plus and two VL Pedal Switchers. Based on this thread I should be able to plug one Pedal Switcher into #5 and the other Pedal Switcher into #6 on the PP2 Plus ... right? Which power cable should I use for each Pedal Switcher to power it from the PP2 Plus? Does the PP2 Plus come with two of that particular cable or do I have to purchase an additional cable??

Yes you can power both pedalswitchers from 5&6. You can use the Line 6 cable with the red end plugged into the switcher (2.5mm barrel size).

Yes this will be possible using GCX/S.

Its probably best if you take a look at the rig example setups first http://voodoolab.com/gcx.htm and try your hand at doing one of the schematics yourself. It really helps to document things on paper

Hi John the problem still exists, actually it seemed to work for five minutes then stopped working again. I reversed the insert cables on the volume pedal end and made sure P1=>Whammy and P2=>Echo Pro were set correctly Tried different insert cables and also different volume pedals (Ernie ball Volume Jnr). I will keep trying but this has got me truly stumped. Will try and post a video to illustrate as I suspect there are a few others who may have/had a similar issue. Will keep you posted.

Hi John or anyone who can share some light:

I am using 2 GCX's and Ground Control with two expression pedals. One is set for delay mix and one for a whammy. When Im in edit mode, only one pedal will give the feedback status, however if I have one fully toe down then the other will work and vise versa. Its kinda hard to explain. Also the midi feedback lights on the GCX only work for one expression pedal at a time (can be either). So basically when both pedals are plugged into the GC Pro, neither work, they only work one at a time. Its like one is jamming the other and vise versa. Im using the Proel Volume pedal http://www.velvetsystems.com/Proel.GF12 ... .Pedal.cfm they both register 0-127 so full range

Any insight appreciated.

Here's a cool rig we just finished for a Pink Floyd Covers band:

GC Pro, PP2+ 230V used.

http://picasaweb.google.com/trueman.joh ... directlink