Voodoo Lab

This was a live-in-case style build we did for a customer. The case was done by Mental Case Inc. out of Nashville. The PowerCON in on the rear panel splits to the Voodoo Lab PP Digital and the TC Electronics G-System.

Here is a two board setup we did. The Pedaltrain Pro was the artists' main board. This is the board that he would use regularly. Occasionally, he would want to use a Wah and additional Wah/Expression pedal, which is what the peripheral board is for. The Classic 2 also houses a separate signal chain for use with acoustic gigs/songs. The Pedaltrain Classic 2 features two separate panels. The rear panel is for the electic guitar signal and linking to the main board. The side panel is dedicated to the acoustic signal, featuring a Direct Out from the Fishman to FOH.

In late 2017 we did a pedalboard build for Underoath before a tour set out. We had very limited time, so we did not get the pedals and had to use placeholders for the wiring. Nonetheless, we were pretty excited with the way this one turned out. It was an overall simple, lightweight, and versatile board. Powered by the 4x4.

Here is a Pedaltrain Pro we wired up for The Wistfal Larks guitarist and front man, Cody Varga. The PX-8 Plus is the brain and it is powered by the PP2+ and ISO-5.

Yes, you definitely can! We do this all of the time.

If your pedalboard has a Power Input on the board you can also wire the input to feature connections to both power supplies, leaving the courtesy port open - in case you need this to charge your phone.

We recently had a local customer wanting to get more into pedals and effects. This board was provided entirely by us, with the exception of the tuner and WAH that the customer already owned. The Mission Volume Pedal is a placeholder we used until we received the customer's Wah pedal.

This board was designed to feature minimal programming needed by the customer, ease of use, less "Tap Dancing", and to cover the various ranges of music he enjoyed playing.

Here are some shots of a board we recently built for Daniel Gow of Against The Current. The board features stereo outputs to get the full depth of the Strymon pedals.

Here is a quick re-wire we did for AWOLNATION this past summer (2016). We used their existing board and re-wired everything on there. We also swapped out the Power Supply to be a Voodoo Lab Mondo and added the Jim Dunlop Guitar Products Mini Volume X for use as an expression pedal. We also added on an interface box for locking connections and used it as a riser for the MIDI Moose, making it much more accessible with the foot.

A customer wanted to get a pedal board developed and built to suit their wide array of music. The customer did not have pedals and did not know where to start. This is where we came along!

This entire board was sourced by us and fully integrated for the customer. Given constraints on budget, style of music being played, and a few other things - here is the board that was developed! The board features an easily programmable MK II One Control for creating presets. The board runs into the Wampler Pedals Compressor, the Dual Fusion, Xotic EP Booster, Jim Dunlop Guitar Products Phase 90, TC Electronic Flashback Delay, and then the Hall Of Fame Reverb. All powered by the Voodoo Lab Pedal Power 2+

The board features one of our side interface panels with Guitar In, To Amp, and PowerCON In connections.

Overall a very versatile board.

Here is a board we wired up for our friend Gerald Guzman of LAVA Rock. This is the board he uses for his smaller rig. We recently (since the pictures have been taken) replaced his Audio Technica Wireless for a Shure Wireless.

All powered by the PP2+.