Voodoo Lab Pedal Power ISO-5

Effects
Giggity
Sparkle Drive Mod
Wahzoo
Microvibe
Superfuzz
Proctavia
Sparkle Drive
Analog Chorus
Tremolo
Power
Pedal Power MONDO
Pedal Power Digital
Pedal Power Digital
Pedal Power ISO-5
Pedal Power 2 Plus
Pedal Power AC
Power Cables
Pedalboard Control
Pedal Switcher
Commander
Control Switcher
Amp Selector
Rack Control
Ground Control Pro
GCX Audio Switcher
Guitar Preamp

T-Shirt
Accessories

 



Isolated power supply for pro stage and studio use

Pedal Power 2 plus Pedal Power ISO-5 is an isolated power supply for powering guitar pedal effects and accessories. It's the ultimate compact solution for smaller pedalboards, rack shelves, or even as an additional power supply for larger boards. With five isolated, filtered and regulated output sections, ISO-5 keeps even the most sensitive vintage and boutique analog pedals dead quiet.

Pedal Power ISO-5 includes a high-current output which will properly power modern digital power-hungry effects like those from Eventide, Line 6, and TC Electronic. There's also a dedicated 18V output for those pedals which need the higher voltage for extra headroom.

Designed to meet the needs of professional users, Pedal Power ISO-5 will provide clean, consistent power, even with the poor AC line conditions often found on stage. Completely isolated output sections eliminate ground loops and unwanted interactions between effects, resulting in lower noise and noticeably improved tone.

Pedal Power® ISO-5 features:

Five isolated outputs
Compatible with all battery operated pedals
Includes high current 9V and 12V outputs, plus dedicated 18V output
Powers Boss Twin, Eventide, Line 6 modelers, TC Electronic Nova, Moog and more
Linear regulation and toroidal transformer for lowest possible noise
Compact design fits small pedalboards and rack shelves
Includes cables and detachable AC line cord
Engineered and handmade in the USA
5-year warranty
*


Pedal Power ISO-5 Specifications

Input
Detachable IEC (computer-type) line cord
120V 50/60Hz (North America model)
100V 60Hz (Japan model)
230V 50/60Hz (Europe/Australia model)

Model and input power are marked on the bottom of unit.

Outputs
5.5x2.1mm barrel connectors center negative
Short circuit protected

9VDC (3) - 100mA
9/12VDC - 300mA
18VDC - 100mA

Included Cables
5.5x2.1mm right angle barrel connectors (4)
5.5x2.1mm right angle to straight barrel connector (1)
5.5x2.5mm right angle red barrel (1)
3.5mm right angle mini plug (1)

For information on additional cables, go here.

Physical
4.9" wide x 3.4" deep x 1.8" tall (124 x 86 x 44 mm)
Weight: 1.24 lbs (0.56 kg)

Special
Toroidal power transformer

Warranty
5 years*


Important!

Pedal Power ISO-5 is manufactured to operate from a specific supply voltage. There are three different models, which accept 100V, 120V, or 240V mains. All units sold in North America are for 120V only. You cannot operate a 120V model using 240V power without the correct step down transformer. The supply voltage is marked on the bottom of the unit.

Short Circuit Protection
Every output on Pedal Power ISO-5 is individually short-circuit protected. This means that if you have a short in a power cable, or one of your pedals malfunctions, ISO-5 will turn off the power to only that pedal. All other outputs will continue to function normally with no long-term damage.

Download User Manual

*North America only. Other regions contact your country's distributor for warranty info.

Voodoo Lab and Pedal Power are registered trademarks of Digital Music Corp. ©2013 All rights reserved.