I want to power a Japanese Boss OC-2 which I hear specifically needs 9.6v instead of the normal Boss 9v.
Somebody said you can run these properly by switching and using the first four power jacks. But that gives 12v, would I damage the OC-2 by doing this?
Basically, if your Boss pedal suggests using the PSA power supply, you would use any output on a Pedal Power 2+ with the corresponding DIP switch set to Normal. If your Boss pedal suggests using the ACA power supply, you would use any one of outputs 1-4 on a Pedal Power 2+ with the corresponding DIP switch set away from Normal.
I hope that helps!