It is currently Sat Nov 25, 2017 4:39 am

All times are UTC - 8 hours [ DST ]





Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Wireless recievers?
PostPosted: Tue May 12, 2009 2:28 pm 
Offline

Joined: Tue May 12, 2009 2:25 pm
Posts: 4
Just wondering... Can the Pedal Power 2 Plus safely power a Shure PGX4 wireless receiver?

The power reqs for the PGX says 12-18Vdc at 150 mA. The PP2P would also be running a couple of distortion pedals, like a TS9 and an OCD.

Thanks...


Top
 Profile  
 
 Post subject: Re: Wireless recievers?
PostPosted: Tue May 12, 2009 10:29 pm 
Offline
Site Admin

Joined: Tue Mar 10, 2009 11:36 pm
Posts: 177
This should be okay from outputs 5 or 6 with the DIP switch set away from normal.

**NOTE: Check the polarity on the power supply, this may be center positive! You need to verify this and then use a reverse polarity cable.

Because all Pedal Power 2+ outputs are isolated, you can power devices that require either polarity by using the correct cable.

Please post your results, thanks!

Regards,
Josh Fiden
Founder / CEO


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: