Pedal Power 4x4, Effectrode Mercury and Kingsley Jester V2

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
Ricardo
Posts: 2
Joined: Thu Oct 06, 2011 12:07 pm

Pedal Power 4x4, Effectrode Mercury and Kingsley Jester V2

Post by Ricardo » Sun Jun 02, 2019 8:31 pm

Hi all! I have a Pedal Power 4x4 and need help for powering these pedals:

- 1 Kingsley Jester V2 (500ma at 12VDC, according to the manufacturer)
- 1 Effectrode Mercury (350ma at 12VDC)

Can I safely power both of them using the two 12V outlets available? I already have the reverse polarity cables.

Thanks!

Rez
Posts: 403
Joined: Thu Sep 01, 2011 10:31 am

Re: Pedal Power 4x4, Effectrode Mercury and Kingsley Jester V2

Post by Rez » Mon Jun 03, 2019 10:57 am

Unfortunately, both cannot be powered from the 12VDC outputs.

Specifications on the Effectrode website indicate that the Mercury Tube Fuzz requires 12VDC and about 600mA.

As such, one or the other could be powered using the two 12VDC outputs and a Current Doubler Adapter, part# PPAP, but... not both.

Cheers!
Cheers,
Ben Resnick
Voodoo Lab - Tech Support

Post Reply