Power Dual Supplies with One Cord

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
techgeekpro
Posts: 2
Joined: Thu Mar 08, 2018 9:02 am

Power Dual Supplies with One Cord

Post by techgeekpro » Thu Mar 08, 2018 9:10 am

I'm looking to add a Pedal Power 2 Plus in addtition to the one I already have. I'd like to power both units with one AC power cord. Is there an adapter I can mount under my PedalTrain Classic2 or can I just use a standard AWG Cord Splitter Y Cable?

JohnClark
Posts: 7133
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Power Dual Supplies with One Cord

Post by JohnClark » Thu Mar 08, 2018 3:24 pm

You can use a standard IEC cable to connect from the Courtesy Outlet of the first Pedal Power 2+ into the AC Input of the second Pedal Power 2+.

I have seen Y cable type IEC cords, but I haven't got a good one to suggest. I tend to avoid them if only because it is then a special cable that cant easily be replaced in a moment of need.

I hope that helps!

techgeekpro
Posts: 2
Joined: Thu Mar 08, 2018 9:02 am

Re: Power Dual Supplies with One Cord

Post by techgeekpro » Thu Mar 08, 2018 3:30 pm

JohnClark wrote:You can use a standard IEC cable to connect from the Courtesy Outlet of the first Pedal Power 2+ into the AC Input of the second Pedal Power 2+.

I have seen Y cable type IEC cords, but I haven't got a good one to suggest. I tend to avoid them if only because it is then a special cable that cant easily be replaced in a moment of need.

I hope that helps!
Sweet. I didn't even notice that there was a courtesy outlet. Thet definately helps!

Post Reply