Pedal power 2+ and outlet with ciocks

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
pascalgr
Posts: 13
Joined: Wed Feb 04, 2015 1:00 pm

Pedal power 2+ and outlet with ciocks

Post by pascalgr » Sun Feb 18, 2018 9:50 am

Hi
I have the power 2+ (export 220v) and ciocks *
Can I power the ciocks with the output outlet of the power 2 plus ?
Thanks
Pascal

JohnClark
Posts: 7127
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Pedal power 2+ and outlet with ciocks

Post by JohnClark » Tue Feb 20, 2018 10:40 am

As long as your Cioks "HooHah Power" accepts 220V, then yes, you can power it from the Courtesy Outlet on the Pedal Power 2+.

You will need a power cord that goes from an IEC C14 to an IEC C5. Here is an example I found on Amazon UK... https://www.amazon.co.uk/kenable-Clover ... B0079I48E0

I hope that helps!

pascalgr
Posts: 13
Joined: Wed Feb 04, 2015 1:00 pm

Re: Pedal power 2+ and outlet with ciocks

Post by pascalgr » Tue Feb 20, 2018 12:09 pm

My ciocks pus...y accept 220v
Do you think she's less than 200 watts? (Limit of the courtesy output)
The total amperage is 1.6A
Thanks

JohnClark
Posts: 7127
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Pedal power 2+ and outlet with ciocks

Post by JohnClark » Tue Feb 20, 2018 1:32 pm

A valid question, however that 1.6A is in reference to the 9V outputs... even at full load, the "HooHah Power" will consume less than 20 Watts from the Mains power.

Good Luck!

Post Reply