Stiff 90-AD amp channel switching & effects loop on/off

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
Hamer95USA
Posts: 23
Joined: Wed Mar 30, 2011 6:17 pm
Contact:

Stiff 90-AD amp channel switching & effects loop on/off

Post by Hamer95USA » Mon Feb 05, 2018 10:44 am

Hello Voodoo Lab,

I have a Zoom G9.2tt floor processor and a Voodoo Lab control switcher. I recently bought a Stiff 90-AD amp head and would like to switch the amp channels between clean & overdrive and the effects loop on/off. The stock footswitch uses a stereo cable to allow for switching. My MIDI signal path is Zoom MIDI out > Voodoo Lab Control Switcher MIDI input.

Would I be able to use the stereo cable with the Control Switcher to switch amp channels and turn the effects loop on/off or would I need a 1/4" TRS male jack to TS male Y cable to access the amp's channel switching and effects loop on/off functions? Would I need to have a custom DIN cable built for me from Voodoo Labs? Your information would be greatly appreciated.

JohnClark
Posts: 7119
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Stiff 90-AD amp channel switching & effects loop on/off

Post by JohnClark » Mon Feb 05, 2018 1:50 pm

For that amp you would need an Insert Point cable. (One TRS end that breaks out to Two TS ends.)

I hope that helps!

Hamer95USA
Posts: 23
Joined: Wed Mar 30, 2011 6:17 pm
Contact:

Re: Stiff 90-AD amp channel switching & effects loop on/off

Post by Hamer95USA » Mon Feb 05, 2018 10:22 pm

Thanks for replying to my thread in a timely manner and the useful advice. I appreciate your technical information on this forum.

Guitar George

Post Reply