It is currently Sat May 26, 2018 1:19 am

All times are UTC - 8 hours [ DST ]





Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Powering a Boss Es-8
PostPosted: Fri Oct 28, 2016 4:25 pm 
Offline

Joined: Wed Jan 20, 2016 6:34 am
Posts: 14
Ho, i got a mondo power supply and i'd like to know if i can power a boss es8 switching system. Someone can help me? Thanks


Top
 Profile  
 
 Post subject: Re: Powering a Boss Es-8
PostPosted: Fri Oct 28, 2016 5:51 pm 
Offline

Joined: Tue May 05, 2009 2:33 pm
Posts: 6986
Location: The Lab
Any of the High Current 9V outputs to the Left will work for this.

I hope that helps!


Top
 Profile  
 
 Post subject: Re: Powering a Boss Es-8
PostPosted: Thu Jan 04, 2018 10:42 am 
Offline

Joined: Thu Jan 04, 2018 10:40 am
Posts: 1
Is this correct? From what I can find, the Boss ES-8 is AC and all the outputs on the Mondo are DC...


Top
 Profile  
 
 Post subject: Re: Powering a Boss Es-8
PostPosted: Fri Jan 05, 2018 11:19 am 
Offline

Joined: Tue May 05, 2009 2:33 pm
Posts: 6986
Location: The Lab
Although Boss does refer to the supplied adapter as an "AC Adapter" (probably because it gets power from an AC mains wall outlet) the PSA series power adapter that comes with the ES-8 outputs 9VDC. The rear panel of the ES-8 says "DC In" above the power jack. ;)

The ES-8 takes 9VDC and draws just under 400mA. It can be powered from the ISO-5, Digital, 4x4, or Mondo Pedal Power models.

I hope that helps!


Top
 Profile  
 
 Post subject: Re: Powering a Boss Es-8
PostPosted: Thu Apr 12, 2018 4:50 am 
Offline

Joined: Thu Apr 12, 2018 4:34 am
Posts: 6
Can I power a Boss ES-8 with a Pedal Power 2 Plus?


Top
 Profile  
 
 Post subject: Re: Powering a Boss Es-8
PostPosted: Thu Apr 12, 2018 11:29 am 
Offline

Joined: Tue May 05, 2009 2:33 pm
Posts: 6986
Location: The Lab
dipsilva wrote:
Can I power a Boss ES-8 with a Pedal Power 2 Plus?


With a Pedal Power 2+ you would combine outputs 5 and 6, with their corresponding DIP Switches set to Normal, using a Current Doubler Adapter (the one with the Green end) together with one of the included all black standard barrel cables.
Alternatively, you could use the power adapter that came with the ES-8 and connect it to the Courtesy Outlet on the back of the Pedal Power 2+.

I hope that helps!


Top
 Profile  
 
 Post subject: Re: Powering a Boss Es-8
PostPosted: Tue Apr 17, 2018 4:26 am 
Offline

Joined: Thu Apr 12, 2018 4:34 am
Posts: 6
It helps a lot. Thank you.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: