It is currently Tue Nov 21, 2017 7:11 am

All times are UTC - 8 hours [ DST ]





Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Current Doubler on the Pedal Power 4x4
PostPosted: Fri Oct 20, 2017 10:48 am 
Offline

Joined: Thu Aug 10, 2017 2:38 pm
Posts: 2
I have a Kingsley Page and Harlot ...each need 800mA 9V.
Can I use 2 current doublers on 1 4x4 power block ( on the 4 high current outputs 9V, 400mA)
Thx !


Top
 Profile  
 
 Post subject: Re: Current Doubler on the Pedal Power 4x4
PostPosted: Fri Oct 20, 2017 11:58 am 
Offline

Joined: Tue May 05, 2009 2:33 pm
Posts: 6756
Location: The Lab
The actual current draw for each of these pedals is under 500mA. You can use one 9V High Current output combined with any other 9V Output using a Current Doubler Adapter (the one with the Green end) on a 4x4 to power each one. No problem running two at the same time... in fact you could run four of them if you wanted ;)

I hope that helps!


Top
 Profile  
 
 Post subject: Re: Current Doubler on the Pedal Power 4x4
PostPosted: Fri Oct 20, 2017 2:26 pm 
Offline

Joined: Thu Aug 10, 2017 2:38 pm
Posts: 2
JohnClark wrote:
The actual current draw for each of these pedals is under 500mA. You can use one 9V High Current output combined with any other 9V Output using a Current Doubler Adapter (the one with the Green end) on a 4x4 to power each one. No problem running two at the same time... in fact you could run four of them if you wanted ;)

I hope that helps!


very helpful indeed !
Thank you.
Joris, Belgium


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


cron