Running 2 larger pedals into the PP2

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
christide
Posts: 1
Joined: Thu Sep 21, 2017 7:29 am

Running 2 larger pedals into the PP2

Post by christide » Thu Sep 21, 2017 9:17 am

I am wanting to run both the ND-1 Nova Delay AND the Shure GLXD-16 Wireless Guitar System with my PP2.

I have read individual threads that say each it is okay to run these pedals in slots 5 OR 6 with the switch set away from normal. However, both threads have warnings about running the individual pedals when there is another large pedal in the chain as well.

So- am I okay to run BOTH the ND-1 and the GLXD-16 simultaneously in slots 5 & 6, with the switch set away from normal?

My chain would be Shure GLXD-16 - - > Boss TU-2 - - > Fender ABY Switcher
then...
- - > Fender ABY Switcher [A] - - > LR Baggs ParaAcoustic
- - > Fender ABY Switcher - - > Xotic EP Boost--> Ibanez TS9 --> Fulldrive 2 --> VP Jr --> Nova --> RV-5

Thanks

JohnClark
Posts: 7086
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Running 2 larger pedals into the PP2

Post by JohnClark » Thu Sep 21, 2017 9:45 am

I think you should be fine to run both of these pedals at once. There would certainly be no harm in trying it out at least.

Let us know what you find!

Post Reply