Powering dl4

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
Trimblec
Posts: 1
Joined: Wed Aug 16, 2017 5:28 pm

Powering dl4

Post by Trimblec » Wed Aug 16, 2017 5:34 pm

Hi,
I just bought a used line 6 dl4 from craigslist. It worked perfectly at the guys house on a one spot. However, since I got it home, I can't get it to turn on. I have a pedal power, not the plus, and a red tipped cable from voodoo labs. I tried it on every plug and tried them all with the switch on and off. I'm not sure what else to do here. Any advice would be much appreciated.
Top
JohnClark
Posts: 7121
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Powering dl4

Post by JohnClark » Thu Aug 17, 2017 1:44 pm

With a Pedal Power 2 you should be able to power a DL-4 from output 5 or 6 with the corresponding DIP switch set away from Normal. No other output or setting will work.

Has this DL-4 been modified that you know of?
Top
Post Reply

Return to “Pedal Power®”