Pedal +2 Modfactor and DL4

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
The Wolves
Posts: 4
Joined: Mon May 22, 2017 3:11 am

Pedal +2 Modfactor and DL4

Post by The Wolves » Mon May 22, 2017 3:18 am

Hi, I've just got my power plus 2 and am very excited to get it plumbed in!
I'm hoping to power 6 9v compacts (boss, turbo rat, dyna comp etc), my Line 6 DL4 as well an eventide modfactor. Is it possible? Any help would be much appreciated.
Thanks!

JohnClark
Posts: 7131
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Pedal +2 Modfactor and DL4

Post by JohnClark » Mon May 22, 2017 9:33 am

Right On!

The DL4 can be powered from output 5 or 6 with the corresponding DIP switch set away from Normal using one of the cables with the Red end.

The ModFactor can be powered using a Current Doubler Adapter (the one with the Green end) connected to one of output 5 or 6 and any other output with both corresponding DIP switches set to Normal together with another one of the cables with the one Red end. OR it can be powered from its supplied power adapter connected to the Courtesy Outlet on the back of the Pedal Power 2+.

The Wolves
Posts: 4
Joined: Mon May 22, 2017 3:11 am

Re: Pedal +2 Modfactor and DL4

Post by The Wolves » Mon May 22, 2017 11:10 am

Thanks so much for the help, you rule John!

Post Reply