Powering a Shure PG4 wireless receiver + L6 M9

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
toutjiaris
Posts: 2
Joined: Thu Mar 23, 2017 4:29 pm

Powering a Shure PG4 wireless receiver + L6 M9

Post by toutjiaris » Thu Mar 23, 2017 4:38 pm

Hello,

What pedal power would be sufficient enough to power my Shure PG4 receiver? it states "12–18 Vdc 160 mA" on the back of the unit.

Also the same question applies to the Line 6 M9.

Thanks

(Edit) Here's the current shure adapter
http://imgur.com/a/UfP6G

JohnClark
Posts: 7088
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Powering a Shure PG4 wireless receiver + L6 M9

Post by JohnClark » Thu Mar 23, 2017 5:03 pm

A Pedal Power Digital would have no problem powering both of these. Will there be other pedals in this setup as well?

toutjiaris
Posts: 2
Joined: Thu Mar 23, 2017 4:29 pm

Re: Powering a Shure PG4 wireless receiver + L6 M9

Post by toutjiaris » Thu Mar 23, 2017 5:23 pm

Thanks john

Currently:

Tc polytune 2
2 x ISP Decimator II's
Ibanez TS9
Shure pg4 receiver

The M9 is potentially for the future plus maybe one or two othee stompboxes. So possibly need more outputs.

JohnClark
Posts: 7088
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Powering a Shure PG4 wireless receiver + L6 M9

Post by JohnClark » Thu Mar 23, 2017 5:52 pm

No problem!

A Pedal Power 4x4 would probably be a better fit in that case. It has all the same High Current capabilities that the Digital has, but adds four 100mA outputs that are good for "regular" pedals.

I hope that helps!

Post Reply