It is currently Mon Nov 20, 2017 2:16 pm

All times are UTC - 8 hours [ DST ]





Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Pedal Power ISO5 dimensions
PostPosted: Thu May 07, 2009 9:55 am 
Offline

Joined: Thu May 07, 2009 9:52 am
Posts: 3
I'm putting a new board together and plan to buy an ISO5 as soon as it's available. I'd like the dimensions so I can leave the right amount of space.

Thanks,
Nathan


Top
 Profile  
 
 Post subject: Re: Pedal Power ISO5 dimensions
PostPosted: Thu May 14, 2009 1:28 pm 
Offline

Joined: Thu May 07, 2009 9:52 am
Posts: 3
I feel neglected. Any info available?

Thanks,
Nathan


Top
 Profile  
 
 Post subject: Re: Pedal Power ISO5 dimensions
PostPosted: Thu May 14, 2009 7:18 pm 
Offline
Site Admin

Joined: Tue Mar 10, 2009 11:36 pm
Posts: 177
Hi Nathan,

Sorry you feel neglected! The Voodoo Lab forum has only been up a very short time, but we've had quite a few posts. It's great to see so much interest!

The Pedal Power ISO-5 will be 4.9" (124mm) wide x 3.4" (86mm) deep x 1.75" (44mm) tall.

Regards,
Josh Fiden
Founder / CEO


Top
 Profile  
 
 Post subject: Re: Pedal Power ISO5 dimensions
PostPosted: Thu May 14, 2009 10:20 pm 
Offline

Joined: Thu May 07, 2009 9:52 am
Posts: 3
Thanks a million. Now to build a cardboard box that size to work around ...


Top
 Profile  
 
 Post subject: Re: Pedal Power ISO5 dimensions
PostPosted: Tue May 19, 2009 11:17 pm 
Offline

Joined: Tue May 19, 2009 11:12 pm
Posts: 28
Looking forward to powering my T-Rex Replica with this. When are these shipping and since it is the same depth and height, but not as wide, as the PP2, can it still be mounted under the Pedaltrain Jr with the included mounting brackets? Thanks!!


Top
 Profile  
 
 Post subject: Re: Pedal Power ISO5 dimensions
PostPosted: Wed May 20, 2009 12:03 am 
Offline
Site Admin

Joined: Tue Mar 10, 2009 11:36 pm
Posts: 177
Mark V wrote:
Looking forward to powering my T-Rex Replica with this. When are these shipping and since it is the same depth and height, but not as wide, as the PP2, can it still be mounted under the Pedaltrain Jr with the included mounting brackets? Thanks!!

We're still finalizing the design, so no formal release date yet. It will definitely fit under the Pedaltrain.

The PP2+ can also power the Replica from outputs 5 or 6 with the DIP switch set away from normal.

Thanks!
Josh


Top
 Profile  
 
 Post subject: Re: Pedal Power ISO5 dimensions
PostPosted: Wed May 20, 2009 8:14 am 
Offline

Joined: Tue May 19, 2009 11:12 pm
Posts: 28
Thanks Josh!!... one other question, the T-rex solution for slots 5/6 with the dip switch on works with the PP2+ and not the PP2, correct? Thanks for your help.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: