|
It is currently Tue May 21, 2013 3:45 pm
|
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 2 posts ] |
|
| Author |
Message |
|
thesjkexperience
|
Post subject: PP2+ ports 5 and 6. Unsure of non-normal switch output  Posted: Mon Apr 09, 2012 12:22 am |
|
Joined: Mon Jan 23, 2012 5:30 pm
Posts: 7
|
|
5-6 (L6) 14.5V / 12V (unregulated) 50mA / 200mA+
This is what 5 and 6 are listed as when switched away from normal. Is it saying that 5 is 14.5 V unregulated 50mA and that 6 is 12Volts unregulated at 200mA+ ?
What does it mean to be unregulated? Our Voltage out of the outlet is averaging 125.3 Volts over the last 2 weeks. I measured port 5 at 16.7 Volts. I want to power a BJFE Pine Green Compressor at 15.5 to 18 Volts, but I need less than 10mA current. How much power is getting to the pedal on port 5 at the non-normal switch position?
|
|
| Top |
|
 |
|
JohnClark
|
Post subject: Re: PP2+ ports 5 and 6. Unsure of non-normal switch output Posted: Wed Apr 25, 2012 5:39 pm |
|
Joined: Tue May 05, 2009 2:33 pm
Posts: 3588
Location: The Lab
|
|
Unregulated means that the output voltage will be dependent on the load.
"5-6 (L6) 14.5V / 12V (unregulated) 50mA / 200mA+" This is saying that in the unregulated mode that either one of outputs 5 and 6 will drop down to about 14.5V with a 50mA load, and 12V with a 200mA load.
If your pedal will introduce a 10mA load, I am sure you will achieve at least the 15.5V minimum requirement for this pedal.
I hope that helps!
_________________
Voodoo Lab ®
Tech/Magician
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 2 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 4 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
