1. Does the Axe-FX 2 use pins 1 and 3 on its MIDI Out? What MIDI controller will you be using?
2. The GCX requires 9VAC... If you are using the power conditioner mentioned, you will need a cable that converts from the Reverse IEC found on the conditioner to the Mains AC connector on your GCX power supply. A local tech may be able to simply put a Reverse IEC plug on the power supply provided with the GCX.
Hello John, thank you for the help!
1. I'm currently in the process of getting information on this.
The manual is not clear about it. It says it uses 5 Pin MIDI cables on the MIDI thru connection but it doesn't state whether it uses all of them.
I don't think it sends power on this out, it just sends MIDI information.
2. So the easiest way is to just use an adapter like that?http://www.amazon.de/netSells%C2%AE-Net ... 561&sr=8-3
sorry, its German.
Also, if I use the GCX in the effects loop of the Axe can I just let the signal (coming from the Axe send) enter the GCX on the return of the 1st loop? I wouldn't use the instrument in on the GCX in that case.
thanks again for your patience!