I just got this and it seems to be working great, but I really want to make sure I'm not going wrong with a couple of my pedals.

All of these are 9V DC and don't seem to be giving me cause for concern:

1. Morley Bad Horsie 2
2. Morley Little Alligator volume
3. Visual Sound H2O
4. Digitech X-series digidelay
5. BBE Sonic Stomp.

This one, though, I'm concerned with;

1. Ibanez JEMINI distortion pedal. Yes, I plugged it in and it seemed to work ok. Now the pedal says 9V DC on the top of it, but the manual says 9V AC: 23-49mA for the power supply. Well, I'm just not sure here. Do I believe the top of the pedal or the manual, or am I simply thinking about this whole thing wrong!

Also, I have an MXR 10 band EQ, which will require the 2x9V cable that's been discussed to make it work, yes? It's rated for 18v.

Thanks for any advice!

Bopjuice

Welcome to the forum.

The MXR 10 Band EQ requires a Voltage doubler cable to supply the 18V.

As far as the Jemini, if it came with it's own power supply see what that is, it should say on it if it is DC. I would think it is DC, as most current mass-produced pedals are, especially if it uses a 9V battery. Just make sure of polarity.

Dom

To power your Jemini use any Pedal Power 2 Plus output, DIP switch set NORMAL with one of the all black (standard polarity) cables supplied.