It is currently Sun Jun 24, 2018 9:37 am

All times are UTC - 8 hours [ DST ]





Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Adding a HEX to my PX-8
PostPosted: Fri Feb 09, 2018 11:36 pm 
Offline

Joined: Fri Feb 09, 2018 11:21 pm
Posts: 1
As I can't seem to stop buying pedals, I now have the need for more than the 8 loops that my PX-8 provides. I would like to run a HEX in the insert loop of the PX-8. How would I go about programming/connecting the HEX and PX-8 to work togethor/save loop combinations etc? What are the HEX's dimensions?


Top
 Profile  
 
 Post subject: Re: Adding a HEX to my PX-8
PostPosted: Tue Feb 13, 2018 8:36 am 
Offline

Joined: Tue Feb 13, 2018 8:34 am
Posts: 4
Can't help, but have the same question. Don't see how to do this in the manual...


Top
 Profile  
 
 Post subject: Re: Adding a HEX to my PX-8
PostPosted: Tue Feb 13, 2018 1:47 pm 
Offline

Joined: Tue May 05, 2009 2:33 pm
Posts: 6991
Location: The Lab
PX-8 Plus will send a MIDI Program Change message with each preset. If you program the HEX to respond to Program Changes then the PX-8 Plus presets will control the HEX.

PX-8 Plus is set up to send MIDI Program Changes on MIDI Channel 1 right out of the box... there is nothing to program.

Enabling Program Changes is is shown in the Enable MIDI Messages section under Setup in the HEX manual.
(The default MIDI Channel for HEX is MIDI Channel 1, so this shouldn't need to be changed.)
Programming HEX loops to respond to presets is shown in the Saving and Recalling Presets section under Use with Other MIDI Controllers section of the HEX manual.

HEX dimensions are 8.5" wide x 2.9" deep x 1.7" tall.

I hope that helps!


Top
 Profile  
 
 Post subject: Re: Adding a HEX to my PX-8
PostPosted: Wed Feb 14, 2018 9:00 am 
Offline

Joined: Tue Feb 13, 2018 8:34 am
Posts: 4
Thanks!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: