Toggling CC values in GCP

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
rd2rk
Posts: 2
Joined: Sat Sep 09, 2017 1:54 pm

Toggling CC values in GCP

Post by rd2rk » Sat Sep 09, 2017 2:03 pm

The manual is not clear on this, it only says that you can set a button to send CC ON/OFF messages. What, exactly, is being sent? I need to be able to send 000/127 or the reverse. I don't have a GCP yet or I'd use MIDIOX to test this, and it's critical to my purchase decision.

JohnClark
Posts: 7079
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Toggling CC values in GCP

Post by JohnClark » Mon Sep 18, 2017 11:29 am

Sorry for the delay here!

The Instant Access buttons do toggle between sending Data Value 0 and 127. Each Instant access button is independently programmable for the MIDI Channel and Control Change number that it will use.

I hope that helps!

rd2rk
Posts: 2
Joined: Sat Sep 09, 2017 1:54 pm

Re: Toggling CC values in GCP

Post by rd2rk » Mon Sep 18, 2017 7:23 pm

Thank you!

Post Reply