Hex - possible to send a CC to mute an input or output?

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
manymanyhaha
Posts: 12
Joined: Thu Apr 22, 2010 10:27 am

Hex - possible to send a CC to mute an input or output?

Post by manymanyhaha » Thu Sep 07, 2017 8:26 am

Hi. Title says it all. I rtfm but just making sure. Thanks in advance.

JohnClark
Posts: 7088
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Hex - possible to send a CC to mute an input or output?

Post by JohnClark » Fri Sep 08, 2017 8:28 pm

The HEX will respond to MIDI Program Changes and Control Changes. a Program Change will set any combination of the loops and a Control Change will control an individual loop.

To use a loop as a mute, you would not connect back to the return. for instance if you had a tuner in a loop and wanted a silent tuning, you would have only the Send of that loop connected to the Input of the Tuner. with nothing connected to the Output of the tuner or the Return of the Loop.

I hope that helps!

Post Reply