Voodoo Lab Hex switcher

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
Posts: 9
Joined: Wed Mar 04, 2015 6:24 pm

Voodoo Lab Hex switcher

Post by claxor » Tue Aug 01, 2017 10:34 am

Do any of you have trouble with "clicks" or "pops" when you push any of the front buttons to change loops? Rjm has a "click-stopper" in their switchers, and I wondered if the VL Hex had something similar.


Posts: 7144
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Voodoo Lab Hex switcher

Post by JohnClark » Tue Aug 01, 2017 10:57 am

Hex has an output buffer that features our Quiet Switching circuit. Quiet Switching will gently mute the Output whenever a loop is switching. It is programmable for a Short interval, Long Interval, or Off and can be set to trigger independently from Loop 1, Loops 2-6, or both.
For those that don't want anything in the signal path, the entire buffer can be removed 100% via a pair of internal jumpers.

I hope that helps!

Post Reply