PX-8 Plus with Volume pedal

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
LAS
Posts: 2
Joined: Mon Jul 17, 2017 10:53 pm

PX-8 Plus with Volume pedal

Post by LAS » Mon Jul 17, 2017 10:59 pm

Quick question for px-8 plus folks:
If put a Volume Pedal on the "insert" send and return, will it always be in the signal path/chain no matter what preset or mode? Or do I have to bake the insert into my presets?
(I'm hoping the former is true btw, bout to pull the trigger on one of these)

JohnClark
Posts: 7088
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: PX-8 Plus with Volume pedal

Post by JohnClark » Tue Jul 18, 2017 9:24 am

When used this way, anything connected to the Insert will always be in the signal path and will be routed between Loops 6 and 7. There is nothing to program regarding the Insert, just plug in and rock!

I hope that helps!

LAS
Posts: 2
Joined: Mon Jul 17, 2017 10:53 pm

Re: PX-8 Plus with Volume pedal

Post by LAS » Wed Jul 19, 2017 9:24 pm

Great news! Thanks so much

Post Reply