controlling GCX with RJM Mastermind

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
c diddy 5000
Posts: 18
Joined: Sat Oct 24, 2009 2:48 pm

controlling GCX with RJM Mastermind

Post by c diddy 5000 » Sat Oct 24, 2009 2:50 pm

i cant seem to figure out how to get these to talk to each other... aany thoughts?

JohnClark
Posts: 7086
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: controlling GCX with RJM Mastermind

Post by JohnClark » Tue Oct 27, 2009 12:57 pm

The GCX responds to MIDI Control Change messages 80-87 on MIDI channel 16. A data value of 127 turns a loop on and 0 turns a loop off.

On the Mastermind you will set Continuous Controller Destination 1-8 to send CC#s 80-87 respectively, on MIDI channel 16 in Global Setup. Then you will assign the data value for each Continuous Controller 1-8 within your presets for the correct loop state in Preset Setup.

Post Reply