GCP, G-Major 2 and Instant Access.

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
zebopdin
Posts: 1
Joined: Wed Oct 21, 2009 12:53 pm

GCP, G-Major 2 and Instant Access.

Post by zebopdin » Wed Oct 21, 2009 1:04 pm

Hey all,
Riddle me this: The G-maj. can only run 1 effect per block at a time (i.e. you can't have a preset with two modulation fx (chorus and flange) at once. So, does this mean that if I want to assign two instant access switches on the GCP (one for chorus and one for flange) I essentially have to build two presets (one using chorus and one using flange). Is this correct?
I guess another way to think of would be that the instant access switches only switch the effect "block" off and on. The actual "effect" that is turned on or off is determined by the preset. Am I right?

Thanx in advance!

JohnClark
Posts: 7121
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: GCP, G-Major 2 and Instant Access.

Post by JohnClark » Wed Oct 21, 2009 4:38 pm

Correct. The Instant Access buttons will control the effect blocks on a G-Major or G-Major 2 and not necessarily the individual effect types within that block. It is in a G-Major patch that you would decide if the block will be chorus or flange.

John C.

Post Reply