Hey everyone, I need some help. I have done some research on my stuff. I have read (and I hope it was all true) That I can have my stuff work the right way.
I have a Timefactor and a Voodoo Labs audio switcher and GCX Pro.
I am wanting to set it up so that I can changed banks when I select a present. But also have my external tap (which I built that is a TRS cable to the external expression port on the GCX) to be able to tap the tempo if need be for songs.

I am very new to MIDI and Controllers. SO I need some help here on what values I need to do in the trees to get this thing to set up right. I thank you guys in advance!!

PS- I have the MIDI out of the GCX going to the in of the audio switcher and the out going to the MIDI in on the Timefactor.

PSS- I know I have to have the Tap to CC of somesort I believe

You first stop would be to the Ground Control Pro manual. Under the Setup Mode section you will see how to name your Time Factor as a Device, enable your GCX Expander, and turn on the Expression Pedal port you are using. Once that is complete, the Edit Preset section will explain how to Assign Program Changes that will recall TimeFactor patches, control the GCX, and assign the Expression Pedal Control Change messages.

You will need to refer also to the TimeFactor manual to find how to set it to respond to MIDI Control Change messages for Tempo.

Let us know if you get stuck!