Does anyone know of a sampler that will respond to MIDI program changes? I am hoping to be able to use the presets on my GCP to start and stop samples in between our songs... So if anyone has done this I would be stoked to hear about it so please let me know.
Thanks a lot.

FYI- Ground Control Pro Instant Access buttons can be set to "SEQ S/S" (Sequencer Start/Stop) for this purpose.

Hey John,
Thanks for that info, but I am using mine in the 10 present per bank mode. No instant access here. That's why I am looking for a sampler that would operate with program changes. But thanks again for the heads up.

Hi !

I tried this but it doesn't work :/

My config is GCP -> Prodipe Midi 1i1o -> Cubase

Cubase sees the Prodipe midi "card", but not the midi signal ...

Do you have some tips about that ? :/

Thanks !

Do you have any other MIDI device that will send MIDI data to test your MIDI interface?

unfortunately not but i have found another material to do this without midi interface

I was too hurry to have time to do it, so I'll test the configuration with the GCP later

Thanks !