GCX CONFIGURATION DRAWINGS

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
nyteowl
Posts: 1385
Joined: Mon Jan 25, 2010 8:53 am

Re: GCX CONFIGURATION DRAWINGS

Post by nyteowl » Fri Apr 27, 2012 6:30 am

a2dconverter wrote:Hello nyteowl...

I like typing so please keep the questions coming...

The best way to see if everything will work without hum is to try it! :D

You can't hurt anything so, if you have a hum after connecting everything as you want, then use a wire or Breakout Box to connect the RTN and OUT grounds.

If you still have hum then there is another loop somewhere that you will have to trace.. :cry:

good luck

Joe
Well, this isn't a real high priority for me right now, but when I do get around to testing it, I'll be sure to post the results.
I am not affiliated with Voodoo Lab in any way, but enjoy sharing what little MIDI and signal routing knowledge I've picked up over the years. If you find my assistance helpful, please pay it forward.

valdoltra
Posts: 13
Joined: Tue Feb 28, 2012 1:46 am

Re: GCX CONFIGURATION DRAWINGS

Post by valdoltra » Tue Oct 15, 2019 7:01 am

Can't we make use of the two guitar inputs/outputs and then tie each one to in/return respectively? Although that means that only one guitar would have been buffered?

Post Reply