PX-8 Plus Insert Loop

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
otraynor
Posts: 3
Joined: Tue Aug 27, 2019 4:00 am

PX-8 Plus Insert Loop

Post by otraynor » Thu Nov 14, 2019 8:11 am

What is the primary use for the insert loop on the PX-8 Plus? Can I use it essentially as a 9th pedal loop that can be programmed like the other loops in preset mode?

Thanks, Oscar

JohnClark
Posts: 7401
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: PX-8 Plus Insert Loop

Post by JohnClark » Thu Nov 14, 2019 10:41 am

The Insert does not function like another loop, it is simply a split between Loops 6 and 7. This can be used to connect a Volume Pedal so it is after any overdrives or to break up the loops to route Loops 1-6 to the front of an amp and have Loops 7 and 8 in the Effects Loop... those are the common uses anyway.
What are the effects you would be looking to use?
------------------====Cheers!====------------------
Image
---------==Voodoo Lab Magician & Tech==---------

Post Reply