GCP for Helix Native Software (mac)

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
Posts: 3
Joined: Thu May 02, 2019 2:29 pm

GCP for Helix Native Software (mac)

Post by Loliveira23 » Sun Oct 27, 2019 1:15 pm


I have a doubt, is it possible to control the Helix Native software in the computer (Mac) with the GCP? and if so, is it ok to connect the GCP to a midi/oudio interface like the Focusrite 4i4, for example, in order to control the software?


Posts: 7453
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: GCP for Helix Native Software (mac)

Post by JohnClark » Tue Oct 29, 2019 6:03 pm

You should be able to do at least some basic controls, the Ground Control Pro will send MIDI Program Changes and Control Change messages. No problem to connect the Ground Control Pro to a MIDI Interface.

I hope that helps!
---------==Voodoo Lab Magician & Tech==---------

Post Reply