Dingbat small and powersupplys

Exchange tips and tricks to help you design the ultimate pedalboard.
Post Reply
JoachimRS
Posts: 2
Joined: Wed Jan 09, 2019 5:55 am

Dingbat small and powersupplys

Post by JoachimRS » Wed Jan 09, 2019 6:02 am

Hey everyone =)

First, I've been using VL products for fifteen years now and they have never let me down - Great work @VL =)

I'm about to put together a Dingbat small, I need to power my L6 HX stomp (in addition to a vintage DynaComp, MXR M300 and a Nano POG) and the VL 4x4 is simply to big/heavy for this board, so I wonder if is it possible to mount a Truetone powersupply (CS6 low profile) under the board?


Cheers =)

JohnClark
Posts: 7238
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Dingbat small and powersupplys

Post by JohnClark » Mon Jan 14, 2019 1:23 pm

I don't know for certain what else will fit under our boards, sorry.

A Pedal Power Digital or the new Pedal Power X4 could be made to work for these pedals.

The HX Stomp would need to use two 9V Outputs combined with a Current Doubler Adapter (the one with the Green end).

The M300 would use any single 9V Output.

The Nano POG and DynaComp could both be powered from the remaining 9V Output using an Output Splitter Adapter.

JoachimRS
Posts: 2
Joined: Wed Jan 09, 2019 5:55 am

Re: Dingbat small and powersupplys

Post by JoachimRS » Mon Jan 14, 2019 4:24 pm

Cool - thanks fo the advice =)

Post Reply