Eventide Modfactor

krcassid · **Joined:** Mon Feb 07, 2011 8:15 pm **Posts:** 3

I've seen several reccomendations in this forum that state that Modfactor can be powered by PP2+ by:

,

Quote:

, the Eventide Modfactor requires a reverse polarity/center positive power cable from the Pedal Power unit (part #PPL6...obtainable from Voodoo Lab).

If it's the Pedal Power 2+, you'll also need the current doubler Y adapter (part #PPAP...obtainable from Voodoo Lab), plug that into outputs 5 & 6, plug the reverse polarity cable into the female end of the Y, then set DIP switches 5 & 6 away from "Normal".

The AC adapter for the Modfactor says it requires 1200 mA. I thought that 5&6 provide 250 each. Am I missing something here?

JohnClark · **Posted:** Wed Feb 09, 2011 10:24 am

The adapter that comes with the Factor pedals is capable of providing 9V at up to 1200mA. The Factor pedals only require a fraction of this capability as they each draw up to about 400mA.

I hope that helps!

krcassid · **Joined:** Mon Feb 07, 2011 8:15 pm **Posts:** 3

Thanks!

Eventide Modfactor

Who is online