It is currently Tue Jun 19, 2018 6:53 pm

All times are UTC - 8 hours [ DST ]





Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: How to get the MX-8 to receive a SYSEX dump?
PostPosted: Sun Jan 07, 2018 5:04 am 
Offline

Joined: Sun Jan 07, 2018 4:58 am
Posts: 3
I recently revived my trusty old Digital Music MX-8 MIDI patch bay, and I was excited to find I still had a SYSEX dump from it to restore all my old routings. Unfortunately, I've forgotten how to get it to receive a SYSEX dump, and the manual doesn't say as near as I can tell--it does a good job of explaining how to send (which works nicely) but not receive. Can anybody help me understand how to get the unit to receive a previous SYSEX dump? Thanks!


Top
 Profile  
 
 Post subject: Re: How to get the MX-8 to receive a SYSEX dump?
PostPosted: Mon Jan 08, 2018 11:54 am 
Offline

Joined: Tue May 05, 2009 2:33 pm
Posts: 6991
Location: The Lab
Wow... it's been a while since I've even heard mention of an MX-8...

I believe the main trick was that you had to route the Input that will be receiving the SysEx Dump to Processor A. The message itself should take care of the rest.

Let us know how it goes!


Top
 Profile  
 
 Post subject: Re: How to get the MX-8 to receive a SYSEX dump?
PostPosted: Tue Jan 09, 2018 1:18 pm 
Offline

Joined: Sun Jan 07, 2018 4:58 am
Posts: 3
JohnClark wrote:
Wow... it's been a while since I've even heard mention of an MX-8...

I believe the main trick was that you had to route the Input that will be receiving the SysEx Dump to Processor A. The message itself should take care of the rest.

Let us know how it goes!


YES! That was the missing tidbit, well, that and a slightly dirty MIDI out port on my recently revived Yamaha DX7II-FD. Once I cleaned up the MIDI out on the keyboard, made sure that I was getting a proper data stream, and then connected up that output to processor A, the MX-8 came through like a champ and accepted the next SYSEX dump just fine (broadcast via MDR save from the keyboard). I can hardly believe it, but in the last four days, I've revived all the hardware that got largely set aside 30+ years ago, and it's all reinitialized with all my old data. That's simply astounding to me.

Thanks for the help! I'm making a note for future reference.

By the way, the MX-8 is still the best dedicated MIDI patch bay of which I'm aware. In fact, I haven't seen any since the MX-8. Was that a category of gear that just didn't get off the ground or something? I still find the MX-8 incredibly useful for bringing together many different devices.


Top
 Profile  
 
 Post subject: Re: How to get the MX-8 to receive a SYSEX dump?
PostPosted: Tue Feb 13, 2018 6:04 pm 
Offline

Joined: Tue Feb 13, 2018 6:02 pm
Posts: 1
@Phileosophos - I just wanted to thank you for bringing up my beloved MX-8. F'n love it and miss it.


Top
 Profile  
 
 Post subject: Re: How to get the MX-8 to receive a SYSEX dump?
PostPosted: Tue Feb 13, 2018 6:42 pm 
Offline

Joined: Sun Jan 07, 2018 4:58 am
Posts: 3
Billobox wrote:
@Phileosophos - I just wanted to thank you for bringing up my beloved MX-8. F'n love it and miss it.


Aw, you're welcome. Believe me, I'm very glad to have revived mine. Just FYI, a quick look on EBay shows several units for sale, and relatively cheap at that ($40 - $70). Maybe you should pick up another? :)

I have to add that I'm still surprised that there aren't other such patch bays on the market today, at least not that I can find. I guess everybody went full-computer or something. But I still find it handy to be able to change routings so easily in wrangling multiple devices.

Thanks for the kind words!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: