Voodoo Lab
http://www.voodoolab.com/forum/

Pairing PX-8 and large Dingbat board
http://www.voodoolab.com/forum/viewtopic.php?f=8&t=7574
Page 1 of 1

Author:  mreastvillage [ Thu May 04, 2017 8:20 pm ]
Post subject:  Pairing PX-8 and large Dingbat board

These are apparently new products as I haven't been able to find much of anything online about them. I'm interested in both the PX-8 switcher and large Dingbat board, and can't really tell if they are supposed to be able to mount together or if the PX-8 would just rest or sit at the base (in either case not desirable).

Can anyone tell if mounting the PX-8 to the large Dingbat board is possible? And if so would it fit in the bag OK? I just can't tell...

Thank you!

Attachments:
Screen Shot 2017-05-04 at 11.18.32 PM.png
Screen Shot 2017-05-04 at 11.18.32 PM.png [ 151.6 KiB | Viewed 718 times ]
Screen Shot 2017-05-04 at 11.20.15 PM.png
Screen Shot 2017-05-04 at 11.20.15 PM.png [ 80.46 KiB | Viewed 718 times ]

Author:  JohnClark [ Fri May 05, 2017 10:40 am ]
Post subject:  Re: Pairing PX-8 and large Dingbat board

Our Medium Dingbat has a unique version intended to mount the PX-8 (or PX-8 Plus) underneath, Dingbat PX. We do not currently have a version of the Large board that does this.

The usable space on the Medium PX is 22" x 13.5" and will fit up to about 10 pedals.

I hope that helps!

Author:  Dennis Rayburn [ Fri Sep 15, 2017 7:10 am ]
Post subject:  Re: Pairing PX-8 and large Dingbat board

I'm also interested in a large Dingbat board with the PX-8 mounted to it. Any news on this yet?

Author:  JohnClark [ Mon Sep 18, 2017 11:44 am ]
Post subject:  Re: Pairing PX-8 and large Dingbat board

There isn't a Large model that mounts the PX-8 or PX-8 Plus underneath, but you could still mount one on top of a Large Dingbat.

What are the pedals you will be using?

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/