Pairing PX-8 and large Dingbat board

Exchange tips and tricks to help you design the ultimate pedalboard.
Post Reply
mreastvillage
Posts: 1
Joined: Thu May 04, 2017 8:12 pm

Pairing PX-8 and large Dingbat board

Post by mreastvillage » Thu May 04, 2017 8:20 pm

These are apparently new products as I haven't been able to find much of anything online about them. I'm interested in both the PX-8 switcher and large Dingbat board, and can't really tell if they are supposed to be able to mount together or if the PX-8 would just rest or sit at the base (in either case not desirable).

Can anyone tell if mounting the PX-8 to the large Dingbat board is possible? And if so would it fit in the bag OK? I just can't tell...

Thank you!
Attachments
Screen Shot 2017-05-04 at 11.18.32 PM.png
Screen Shot 2017-05-04 at 11.18.32 PM.png (151.6 KiB) Viewed 2116 times
Screen Shot 2017-05-04 at 11.20.15 PM.png
Screen Shot 2017-05-04 at 11.20.15 PM.png (80.46 KiB) Viewed 2116 times

JohnClark
Posts: 7088
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Pairing PX-8 and large Dingbat board

Post by JohnClark » Fri May 05, 2017 10:40 am

Our Medium Dingbat has a unique version intended to mount the PX-8 (or PX-8 Plus) underneath, Dingbat PX. We do not currently have a version of the Large board that does this.

The usable space on the Medium PX is 22" x 13.5" and will fit up to about 10 pedals.

I hope that helps!

Dennis Rayburn
Posts: 1
Joined: Fri Sep 15, 2017 6:47 am

Re: Pairing PX-8 and large Dingbat board

Post by Dennis Rayburn » Fri Sep 15, 2017 7:10 am

I'm also interested in a large Dingbat board with the PX-8 mounted to it. Any news on this yet?

JohnClark
Posts: 7088
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Pairing PX-8 and large Dingbat board

Post by JohnClark » Mon Sep 18, 2017 11:44 am

There isn't a Large model that mounts the PX-8 or PX-8 Plus underneath, but you could still mount one on top of a Large Dingbat.

What are the pedals you will be using?

Post Reply