Pedaltrain Nano Plus

Exchange tips and tricks to help you design the ultimate pedalboard.
Post Reply
65_Mustang
Posts: 7
Joined: Sun Dec 11, 2016 11:12 pm

Pedaltrain Nano Plus

Post by 65_Mustang » Mon May 01, 2017 12:04 pm

I want to use a Modtone Tuner, Boss SD1, DS1, FZ5, and a NS2. Will all of these fit on a Pedaltrain Nano Plus? Also what would be best to poer this set up. My Novo 24 is to big and heavy now lol. I need something smaller and lighter for gigs.

JohnClark
Posts: 7086
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Pedaltrain Nano Plus

Post by JohnClark » Mon May 01, 2017 12:24 pm

The Nano+ is 18" wide x 5" deep... I'd suggest laying your pedals out on the floor and measuring if they will fit. I like to use masking tape on the floor to mimic the dimensions of a board then set my pedals down inside the tape lines. If you have a cat you can later take a video as it decides it needs to sit within the making tape boarder then post it to YouTube like so many others have been doing recently.

As I mentioned in your other thread about this, none of our current power supplies fit under any of the flat PedalTrain boards. But they do fit under a Small Dingbat pedalboard ;)

I hope that helps!

Post Reply