Voodoo Lab control switcher

Exchange tips and tricks to help you design the ultimate pedalboard.
Post Reply
OUIJA
Posts: 1
Joined: Fri Jan 20, 2017 6:19 pm

Voodoo Lab control switcher

Post by OUIJA » Fri Jan 20, 2017 6:26 pm

I need help!! I am trying to connect my Voodoo Lab controller to my Mesa triple Rec.. I am running into a EFX Looper.. Can anyone PLEASE HELP ME? Thank you

JohnClark
Posts: 7133
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Voodoo Lab control switcher

Post by JohnClark » Wed Jan 25, 2017 11:59 am

Sorry for the delay! We have been away at the NAMM show all last week.

What things are you controlling on your Triple Rectifier?

You should only need four 1/4" cables (Instrument or speaker cables are fine here) to connect between the Control Switcher and the External Switching jacks on your amp. You can get full control by connecting to the Channel 1, Channel 3, Boost, and FX Loop External Switching jacks on the amp.

You can leave out the connection for Channel 2. The amp should default to Channel 2 when the Control Switcher switches for Channel 1 and Channel 3 are Off.

I hope that helps!

Post Reply