Pedal Power 2 output issue

Exchange tips and tricks to help you design the ultimate pedalboard.
Post Reply
EGrossm
Posts: 2
Joined: Tue Mar 17, 2015 3:30 am

Pedal Power 2 output issue

Post by EGrossm » Fri Aug 14, 2015 12:44 pm

Hey, my Pedal Power 2 seems to have power because the LED lights in each of the individual pedals on the board light up, but the rig produces very little volume. I've tested each cable, and my larger board (powered by two Pedal Power 2s) works perfectly, so I know it's not the amps or the guitar. Is it possible for the PP2 to produce enough power to light the LEDs but not enough to adequately power the rig?

JohnClark
Posts: 7037
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Pedal Power 2 output issue

Post by JohnClark » Fri Aug 14, 2015 1:08 pm

I guess one quick way to eliminate (or confirm :shock: ) the Pedal Power as the culprit would be to swap it with one of the other Pedal Power units you have.

Have you checked that each pedal operates individually as intended when connecting just the guitar directly to the pedal and the pedal directly to the amp?

What are the pedals you are powering?

Post Reply