Fulltone Clyde, Morley Little Alligator and GCP

Exchange tips and tricks to help you design the ultimate pedalboard.
Post Reply
eduva
Posts: 3
Joined: Fri Dec 17, 2010 8:21 am

Fulltone Clyde, Morley Little Alligator and GCP

Post by eduva » Mon Apr 23, 2012 3:01 pm

Hi, Can i conect a Fulltone Clyde standard Wah and Morley Little Alligator Volume pedal on the Ground Control Pro? o Maybe in the GCX?

JohnClark
Posts: 7079
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Fulltone Clyde, Morley Little Alligator and GCP

Post by JohnClark » Tue Apr 24, 2012 12:33 pm

If anything these would connect to either the GCX or a Pedal Switcher. However, given that you must put your foot on these to use them, and that the Clyde is true-bypass anyway, I would simply connect the guitar signal directly to these pedals then off to wherever it would otherwise go. *Of course, this depends on exactly where you want these pedals routed in your signal path. ;)

The ports on the Ground Control Pro are for passive volume or expression pedals. These ports are used only to convert the pedal movement into a MIDI signal to control parameters on a capable MIDI device.

Good Luck!

Post Reply