Voodoo Lab
http://www.voodoolab.com/forum/

Power Dual Supplies with One Cord
http://www.voodoolab.com/forum/viewtopic.php?f=7&t=8878
Page 1 of 1

Author:  techgeekpro [ Thu Mar 08, 2018 9:10 am ]
Post subject:  Power Dual Supplies with One Cord

I'm looking to add a Pedal Power 2 Plus in addtition to the one I already have. I'd like to power both units with one AC power cord. Is there an adapter I can mount under my PedalTrain Classic2 or can I just use a standard AWG Cord Splitter Y Cable?

Author:  JohnClark [ Thu Mar 08, 2018 3:24 pm ]
Post subject:  Re: Power Dual Supplies with One Cord

You can use a standard IEC cable to connect from the Courtesy Outlet of the first Pedal Power 2+ into the AC Input of the second Pedal Power 2+.

I have seen Y cable type IEC cords, but I haven't got a good one to suggest. I tend to avoid them if only because it is then a special cable that cant easily be replaced in a moment of need.

I hope that helps!

Author:  techgeekpro [ Thu Mar 08, 2018 3:30 pm ]
Post subject:  Re: Power Dual Supplies with One Cord

JohnClark wrote:
You can use a standard IEC cable to connect from the Courtesy Outlet of the first Pedal Power 2+ into the AC Input of the second Pedal Power 2+.

I have seen Y cable type IEC cords, but I haven't got a good one to suggest. I tend to avoid them if only because it is then a special cable that cant easily be replaced in a moment of need.

I hope that helps!


Sweet. I didn't even notice that there was a courtesy outlet. Thet definately helps!

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/