Voodoo Lab
http://www.voodoolab.com/forum/

Pedal power 2+ and outlet with ciocks
http://www.voodoolab.com/forum/viewtopic.php?f=7&t=8842
Page 1 of 1

Author:  pascalgr [ Sun Feb 18, 2018 9:50 am ]
Post subject:  Pedal power 2+ and outlet with ciocks

Hi
I have the power 2+ (export 220v) and ciocks *
Can I power the ciocks with the output outlet of the power 2 plus ?
Thanks
Pascal

Author:  JohnClark [ Tue Feb 20, 2018 10:40 am ]
Post subject:  Re: Pedal power 2+ and outlet with ciocks

As long as your Cioks "HooHah Power" accepts 220V, then yes, you can power it from the Courtesy Outlet on the Pedal Power 2+.

You will need a power cord that goes from an IEC C14 to an IEC C5. Here is an example I found on Amazon UK... https://www.amazon.co.uk/kenable-Clover ... B0079I48E0

I hope that helps!

Author:  pascalgr [ Tue Feb 20, 2018 12:09 pm ]
Post subject:  Re: Pedal power 2+ and outlet with ciocks

My ciocks pus...y accept 220v
Do you think she's less than 200 watts? (Limit of the courtesy output)
The total amperage is 1.6A
Thanks

Author:  JohnClark [ Tue Feb 20, 2018 1:32 pm ]
Post subject:  Re: Pedal power 2+ and outlet with ciocks

A valid question, however that 1.6A is in reference to the 9V outputs... even at full load, the "HooHah Power" will consume less than 20 Watts from the Mains power.

Good Luck!

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/