Electro Harmonix Synth9/Pedal Power 2 Plus

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
mtoram
Posts: 2
Joined: Fri Mar 09, 2018 9:14 am

Electro Harmonix Synth9/Pedal Power 2 Plus

Post by mtoram » Fri Mar 09, 2018 9:17 am

I recently purchased the Synth 9 pedal. Can anyone tell me which output I should use for it? Here are the synth9 specs: https://www.ehx.com/assets/instructions/synth9.pdf

Thank you!

JohnClark
Posts: 7086
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Electro Harmonix Synth9/Pedal Power 2 Plus

Post by JohnClark » Fri Mar 09, 2018 11:33 am

The "9" series pedals all claim to draw 100mA so they all should be able to be powered from any output on a Pedal Power 2+ with the corresponding DIP Switch set to Normal. However, a small number of users have reported trouble with these pedals not always starting up but that moving them to output 5 or 6 with the corresponding DIP switch set to Normal solves the problem.

I hope that helps!

mtoram
Posts: 2
Joined: Fri Mar 09, 2018 9:14 am

Re: Electro Harmonix Synth9/Pedal Power 2 Plus

Post by mtoram » Fri Mar 09, 2018 12:08 pm

Thank you! I'll give it a shot and report back.

Post Reply