Voodoo Lab
http://www.voodoolab.com/forum/

Hi! Which PP2+ outlets for a Whammy V and an MXR Boost MC402
http://www.voodoolab.com/forum/viewtopic.php?f=7&t=8777
Page 1 of 1

Author:  marchini_1010 [ Wed Jan 24, 2018 10:36 am ]
Post subject:  Hi! Which PP2+ outlets for a Whammy V and an MXR Boost MC402

Hi! Which PP2+ outlets must I use for a Digitech Whammy V that requires 9VDC 1.3mA and an MXR Boost Overdrive MC402 that requires 9vdc 5.5mA according to the manual?

Thanks!

Author:  JohnClark [ Wed Jan 31, 2018 1:35 pm ]
Post subject:  Re: Hi! Which PP2+ outlets for a Whammy V and an MXR Boost M

The Whammy 5 would be best to power using a Current Doubler Adapter (the one with the Green end) connected to Output 5 or 6 and any other Output with the corresponding DIP Switch set to Normal.

The MC402 can be powered from any output with the corresponding DIP Switch set to Normal.

I hope that helps!

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/