Hi! Which PP2+ outlets for a Whammy V and an MXR Boost MC402

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
marchini_1010
Posts: 15
Joined: Tue Jun 21, 2016 2:43 pm

Hi! Which PP2+ outlets for a Whammy V and an MXR Boost MC402

Post by marchini_1010 » Wed Jan 24, 2018 10:36 am

Hi! Which PP2+ outlets must I use for a Digitech Whammy V that requires 9VDC 1.3mA and an MXR Boost Overdrive MC402 that requires 9vdc 5.5mA according to the manual?

Thanks!

JohnClark
Posts: 7086
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Hi! Which PP2+ outlets for a Whammy V and an MXR Boost M

Post by JohnClark » Wed Jan 31, 2018 1:35 pm

The Whammy 5 would be best to power using a Current Doubler Adapter (the one with the Green end) connected to Output 5 or 6 and any other Output with the corresponding DIP Switch set to Normal.

The MC402 can be powered from any output with the corresponding DIP Switch set to Normal.

I hope that helps!

Post Reply