Pedal Power 2 Plus Courtesy outlet

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
Selim
Posts: 3
Joined: Fri Jan 19, 2018 7:12 pm

Pedal Power 2 Plus Courtesy outlet

Post by Selim » Fri Jan 19, 2018 7:38 pm

Hi,

First of all, this is my first post and I am new in the pedalboard's world, so maybe this question should sound stupid.

I would like to know if I can connect 3 pedals (Whammy 5+Ditto+Friedman BE OD) into the courtesy outlet with a power strip bar.
Screenshot_2018-01-23-18-50-21-1.png
Power Strip
Screenshot_2018-01-23-18-50-21-1.png (110.75 KiB) Viewed 1279 times
I already connected 8 pedals in this order:

1. Cry-Baby 535Q
2. TC Electronict Polytune3
3. OCD Fulltone
4. Boost/Drive Liner MXR
5. Reverb MXR
6. Phase 90 MXR
7. Chorus MXR
8. TC Electronic Flashback
rsz_1img-20180121-wa0068.jpg
Pedalboard
rsz_1img-20180121-wa0068.jpg (40.34 KiB) Viewed 1276 times
I run my Voodoo Lab on 220V.

THANKS

Selim
Posts: 3
Joined: Fri Jan 19, 2018 7:12 pm

Re: Pedal Power 2 Plus Courtesy outlet

Post by Selim » Tue Jan 23, 2018 3:39 pm

Guys, who has done that? :(

JohnClark
Posts: 7037
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Pedal Power 2 Plus Courtesy outlet

Post by JohnClark » Wed Jan 31, 2018 1:28 pm

No problem to run a power strip after the Courtesy Outlet. Your usage would be well under the 200 Watt rating. If you have a 220V Export model Pedal Power, you will need something that has a Reverse IEC (NEMA C14) plug.

I hope that helps!

Selim
Posts: 3
Joined: Fri Jan 19, 2018 7:12 pm

Re: Pedal Power 2 Plus Courtesy outlet

Post by Selim » Wed Jan 31, 2018 2:09 pm

Thanks John,
Something like this:Image

JohnClark
Posts: 7037
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Pedal Power 2 Plus Courtesy outlet

Post by JohnClark » Wed Jan 31, 2018 3:34 pm

That would work, yes!

Post Reply