Voodoo Lab
http://www.voodoolab.com/forum/

Output Splitter Adapter - Ground lifted side not powering up
http://www.voodoolab.com/forum/viewtopic.php?f=7&t=8418
Page 1 of 1

Author:  Tom F [ Fri Sep 15, 2017 5:17 am ]
Post subject:  Output Splitter Adapter - Ground lifted side not powering up

I purchased this product to split 2 Boss or 1 Boss, 1 MXR pedal(s) that are not used stacked. The ground lifted connection does not power the pedal. Help. I am using a Pedal power 2 and adjacent pedals are Boss CH1 and, thinking about it, a MXR Phase 90

Author:  JohnClark [ Mon Sep 18, 2017 12:03 pm ]
Post subject:  Re: Output Splitter Adapter - Ground lifted side not powerin

The two pedals on the Output Splitter have to be in the same signal path, preferably one right next to the other. The one on the "lifted" side gets its ground reference thru the audio connection between the pedals.

Also, both of these pedals will need a cable connected to their Input jacks before they will even turn on. This is a battery saving feature on many guitar pedals. So be sure you are testing with a complete signal path connected, or at least Guitar -> Pedal 1 -> Pedal 2 -> Amp.

Let us know if you are still having trouble!

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/