Powering Strymon Flint, Lex, El Capistan

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
urlkonig
Posts: 5
Joined: Tue Nov 17, 2009 10:29 am

Powering Strymon Flint, Lex, El Capistan

Post by urlkonig » Sun Apr 01, 2018 11:42 am

Will a Pedal Power 2+ power these Strymon pedals (Flint, Lex, El Capistan)? If so, do I need to use voltage doubling cables, set the DIP switches away from normal? Do only certain power output jacks work for STrymon pedals (I vaguely remember that is the case, but can't find a clear answer.)

thanks.

JohnClark
Posts: 7079
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Powering Strymon Flint, Lex, El Capistan

Post by JohnClark » Tue Apr 03, 2018 2:50 pm

These pedals each require about 250mA so the best solution here would be to use the Courtesy Outlet for one of them using its supplied adapter and use outputs 5 and 6 (with the corresponding DIP Switches set to Normal) for the other two.

I hope that helps!

urlkonig
Posts: 5
Joined: Tue Nov 17, 2009 10:29 am

Re: Powering Strymon Flint, Lex, El Capistan

Post by urlkonig » Tue Apr 03, 2018 4:57 pm

thanks!

Post Reply