It is currently Sun Nov 19, 2017 11:07 pm

All times are UTC - 8 hours [ DST ]





Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: High current output on Iso-5
PostPosted: Thu Jun 29, 2017 9:29 am 
Offline

Joined: Thu Jun 29, 2017 9:24 am
Posts: 1
Does the high current output on the Iso-5 not work for low current 9V pedals? None of my Boss or EHX pedals work from this output. The first three outputs power my Boss/EHX stuff just fine, but the 9V high current output does not power them at all.

Am I only able to power 3 low current 9V pedals with the Iso-5?


Top
 Profile  
 
 Post subject: Re: High current output on Iso-5
PostPosted: Thu Jun 29, 2017 1:59 pm 
Offline

Joined: Tue May 05, 2009 2:33 pm
Posts: 6751
Location: The Lab
The High Current 9V should be fine for any pedal that draws less than the maximum rating... or any pedal that works from the 100mA outputs should also be perfectly fine from the High Current output. A pedal will only draw the amount of current it needs to operate.

When you tested this output with these pedals, did you have a guitar cable connected to their Input jack? Most battery operated effects need a guitar cord plugged into them in order to power up in the first place. This is a way of saving battery life since unplugging the guitar from the pedal will also cut the power to the circuit.

Let us know what you find!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: